How To Fix Hard Drive Bad Sectors

Bad sectors on hard drive is generally divided into 2 parts are physically damage and damage to software or also known as the Bad block and bad sectors. If hard drive is physically damaged it due to dust is too much, fell, hit by violent clashes and others so as to damage the hardware components.

While the damage was due to the hard drive on a hard drive software as these are working all of a sudden your computer off, for example due to power outage.

Well now there are several tools that can be used when experienced hard drive bad sectors, software we can use the following tools:

A. HDD Low Level Format Tool

Application of Low Level Format this is serving to permanently delete all data, partitioning and information bad sector that is in the hard drive. After you run this application Low level format the hard drive will be net total, such as when you use the hard drive first. Note: before you perform a low-level format it before you have to backup the data used were important. This tool can also permanently delete your personal data or your confidential data.

The following are the steps to use HDD Low Level Format:

1.Download the first HDD Low Level Program in the Format www.hddguru.com or search in google, too

many sites that provide software download tool.

2.Install and run the program HDD Low Level Format

3.Select the hard drive that you want to Format, and then click Continue.

4.Click on the Low Level Format, click format This Device ...

5. Wait until finished, usually take quite a while.

Below is a picture in step 3 and 4:

Note: If you use another Computer (PC) and in-use hardsik instead of Slave master primary or External hard drive make it if you have a Usb cable to the IDE or IDE hard drive if you are using a SATA hard drive using only the chassis hard drive SATA is already equipped with cable-stayed usbnya plug it into your computer (PC).

B. Recovery Software from multiple Vendors hardsik

The hard drive Vendor software to perform analysis of issuing and maintenance, including the hard drive as follows:

1. Fujitsu IDE Low level Formatting Utilities Software is to fix the bad sectors hard drive to hard drive brand Fujitsu and you can download here or here www.fujitsu-europe.com/support/disk/software/erase.zip

2. Seatools for Windows Seagate's Seagate's Seatools for DOS and tools from vendors Seagate's that can be used for non-hard drive seagate or maxtor brand, from some other vendor's hard drive and you can download it directly at www.seagate.com
3. Western Digital Data Lifeguard Diagnostics functionality that is similar to non-hard drive as well, especially the western brand of hard drive. You can download at www.softpedia.com
   

C.  Bad Block or physically damage the hard drive

Check your hard drive via the previous Bios is detected by the Bios or not, if it's only Readable means damage on Software hardsik and you can use the tools that have been discussed above and follow the steps, if not entirely then logically readable by software alone is not writable-detection by the Bios in-Format, let alone certainly cannot.

Means the hardware in the server hard drive there are vital, just maybe motherboad or magnetn disc damage caused fell, concussion etc.

a few that are not functioning or damaged part

According to the experience of physically damage the hard drive is the most severe on record was magnetnya. This can be overcome by following these steps:

1. Wrap your hard drive by using the meeting (if it can be too thick and not too thin) drop to the top of the mattress or up a rather thick carpet, to drop approximately 1 metre in height (could be less than 1 meter) from the top of the mattress or carpet for 3 or 4 times (Note: do not slam harder) Although this way is a bit ekstream. Okay, try again after that ignited my already detect in-ter-what is not, if the Bios is detected (you're lucky) get on with it in-format, if not yet not without being forced.
2. Immediately take it to the Experts to check the damage-took place in Motherboardnya or a spindle could be both.

Note: If the damaged motherboadnya means it can still be saved by replacing data-datanya with the appropriate hard drive motherboard with your hard drive, but when the spindle is broken then you get ready for a new hard drive.

Hopefully this info useful.

source : http://blog.fastncheap.com